APlusLift 10,000LB 2-Post Overhead Single Release Car Lift with 3 Year Warranty – AP-10SR

• Industry leading 3 YEAR WARRANTY
• Single Point Safety Lock Release System
• Combo (Symmetrical and Asymmetrical) Arm Assembly with Adjustable Screw Pads!
• CE Certified Lift Structure and Hydraulic System – Tested for 115% Dynamic Load Capacity and 150% Static Load Capacity
• One Set of 4″ Tall Truck Adapters Included; 6’9″ Lift Height Maximum with Truck Adapters
• All Robot Welded Structure with Durable Powder Coated Finish

APlusLift AP-10SR car lift (auto hoist) is one of the most affordable single point release over head car lifts built with quality materials and good workmanship. It is an upgrade from the bestselling HW-10KOH-A model with an addition of single point lock release. The lift has a strong double “S” column design to support 10,000 LB capacity.

We are proud to offer an industry leading 3 year warranty for all parts! We have all replacement and optional parts available for our lifts. We welcome suggestions to improve our products and service!

Free shipping to lower 48 states with forklift (or similar) on-site. Car lifts require on-site forklift (no liftgate). We strongly recommend against renting a forklift; expense not reimbursed. See shipping policy below for limited access/remote/high-cost areas.

Model    AP-10SR (This Model)

Manual    AP-10SR Manual Lock Assembly

Style    Overhead

Lock Release    Single Point Release

Warranty    3 Years (36 Months)

Lifting Capacity    10,000 LB

Overall Height    143 3/16″

Overall Width    134 5/16″

Maximum Lift height with Truck Adapters    81″

Maximum Lift height without Truck Adapters    75″

Minimum Height of Adjustable Pads from Ground    4″

Drive Through Width (Carriage to Carriage)    100″

Column to Column Width    109″

Column Cross Section    11″L x 7″W

Driving Mode    Dual hydraulic cylinders, chain drive

Motor    220V Single Phase 3HP 10A (recommend a 30A breaker)

Hydraulic Oil    3-5 gallons AW32/AW46 (Not Included)

Time to full rise    50 seconds

Shipping Weight    1400 LB and 120 LB

Shipping package size

• 113″L x 22″W x 40″H (Car Lift)
• 38″L x 17″W x 14″H (2ft Height Extension Crate)

Concrete Requirement    6″ thick at 3500 psi reinforced with fiberglass or steel (4″ thick for vehicles 9000LB and below)

Parts Included

• 4 pieces of adjustable screw pads
• 4 pieces of 4″ tall truck adapters (height extensions)
• 10 anchor bolts
• 10 shims
• 2 tool trays
• 2 toe guards

Optional Parts    2 3/4″ and 6″ Tall Truck Adapters

Arm Assembly    Combo (Symmetrical and Asymmetrical) Arm Assembly

Front Arms    Straight Front 3 Stage reach from 22 7/8″ to 42 5/8″

Back Arms    Straight Rear 2 Stage reach from 33 5/8″ to 52 7/8″

Column Steel Thickness    13/64″

Carriage Steel Thickness    15/64″

Carriage Yoke Thickness    9/16″

Arm Steel Thickness    15/64″

Base Plate Steel Thickness    5/8″

Features

• CE Certified Lift Structure and Hydraulic System
• Third party tested with a dynamic load capacity of 115%
• Third party tested with a static load capacity of 150%
• Durable hydraulic system
• Easy to operate and maintain
• Single point safety lock release
• Double Seal Rings Protecting PU Material
• Carriage Material Q355 (ASTM A572), Stronger Than Normal Q235 Steel
• Lifting operation by pressing “UP” button on motor
• Manual lowering operation by pressing lever
• Relief valve built in power pump to prevent overloading
• Automatic arm lock restraints
• Relief valve built in power pump to prevent overloading
• Door guards protection rubber
• Up-limit switch to protect cylinders working stroke used in safe length scope
• Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
• Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down